Layer 2 vpn is being used by many of service providers. It can be configure in two ways, one way to use l2 vpn over ip cloud with the help of l2tpv3 and another way is to use over mpls backbone by using encapsulation mpls. In this document I will be covering how to configure l2 mpls vpn over service provider cloud.
Before moving ahead penultimate hop popping concept should be cleared.
Click here read the full story.
regards
shivlu jain
SDN and NFV is the next phase of technology change which will help service provider to launch the services in single click. This is all about the programmability of the networks by using open source software defined network controller.
Wednesday, April 15, 2009
Configuring Layer 2 MPLS VPN
Subscribe to:
Post Comments (Atom)
13 comments:
Mast hai vai.. majaa aa gya
Thankx for th post sir..its vy informative...
first thanks for this post and ofcourse for your all effort in this valuable blog
and i have some notes or explanations if you don't mind
first
directly above table4
you mentioned
=============================
Table 2 depicts that l2 session is established with peer 30.30.30.30 against VCID 100
============================
i think yu mean TABLE3 not 2
and you mentioned
The label can be different also
i can't understand this you mean the vc labels can be different
if yes how the packets will forward
again thanks a lot
and i hope i'll be a follower of you posts because you make it easy to understand
Really thanks for reading the document. You are abso right the table number should be three. Regarding second query about labels are different mean that in case case the local and remote labels are showing 19 so it could be different from 16 to 100000.
thanks for your reply
Hi,
I am doing a final year project on mpls layer 2 VPN but I need your advice as the Uni I am in has no 7600 series router with even SIP card. Would any lower series router do the job I am willing to carry out?
Best regards
You can test the point to point layer vpn but point to multipoint is not possible in cisco without 7600+SIP/SPA card. For point to point l2 vpn please use the GNS software and the soft is open source based and easy to install on linux as well as on windows.
thanks a lot man ;)
Could you pls verify it seems the pdf file is not reachable?
its working....
ffxiv gil
Thank you very much for sharing information about the second layer of MPLS VPN.
US VPN
It improves the forwarding speed of routers and now emerge as a standard technology that is capable for large scale IP networks.
Thanks for VPN configuration.
top10-bestvpn.com
Post a Comment